11. Voice
■ Voice tag dialing
You can dial up to 25 stored numbers using voice tag dialing.
Before using voice tags, note the following:
•
Voice tags are not language-dependent. They are dependent on the
speaker's voice.
•
You must say the name exactly as you said it when you recorded it.
•
Voice tags are sensitive to background noise. Record voice tags ,and use them
in a quiet environment.
•
Very short names are not accepted. Use long names and avoid similar names
for different numbers.
Note: The use of voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing in
all circumstances.
Assign a voice tag
Before you use voice dialing, assign a voice tag to the number.
1. In the standby mode, scroll down to enter the contacts list.
2. Highlight the contact you want to assign a voice tag, and select
Details
>
Options
>
Add voice tag
>
Start
.
3. Speak clearly into the microphone. Do not select
Quit
unless you want to
cancel the recording.
The phone automatically stops recording, saves, and replays the voice tag.
The
icon is displayed next to commands that have voice tags assigned.
If the recording is not successful, your phone displays
Voice system error
.
Select
Options
>
Add voice tag
, and repeat Step 3.
Dial a number
1. In the standby mode, select and hold
Contacts
. When you hear several beeps
and
Speak now
is displayed, release
Contacts
.
2. Pronounce the voice tag clearly into the microphone.
When the phone finds the voice tag,
Found:
is displayed, and the phone
automatically dials the number. If the phone does not locate a number or
recognize the voice tag,
No match found
is displayed.
V o i c e
54
Voice tags
After you have associated a voice tag to a contact, in the standby mode, select
Menu
>
Voice
>
Voice tags
>
Options
>
Playback
,
Change
, or
Delete
.
■ Voice commands
Set as many as five voice commands, to allow hands-free operation of certain
phone features.
Assign a voice tag to a command
Before using voice commands, you must first add a voice tag to the phone function.
1. In the standby mode, select
Menu
>
Voice
>
Voice commands
.
2. Select the phone function you wish to tag:
Profiles
,
Voice mailbox
,
Voice
recorder
or
Call log
.
3. If necessary, select an option associated with that function, and
Options
>
Add command
.
4. Select
Start
, and speak the voice tag clearly into the microphone. Do not
select
Quit
unless you want to cancel the recording.
The phone replays and saves the recorded tag.
appears next to commands
that have voice tags assigned.
Activate a voice command
After you have associated a voice tag with a phone function, you can issue a
command by speaking the voice tag.
1. Select and hold
Contacts
.
2. When
Speak now
appears, pronounce the voice tag clearly into the microphone.
When the phone finds the voice tag,
Found:
is displayed, and the phone plays the
recognized voice tag through the earpiece. The function you requested is activated.
Options
After you have associated a voice tag to a command, in the standby mode, select
Menu
>
Voice
>
Voice commands
>
Options
>
Playback
,
Change
, or
Delete
.
V o i c e
55
■ Voice recorder
This feature allows you to record speech or sound with your phone and listen to them
later. The total available time is 30 seconds if no memos have been stored. The
maximum length of a recording depends on how much memory remains available.
The recorder cannot be used when a data call or GPRS connection is active.
Record speech or sound
1. In the standby mode, select
Menu
>
Voice
>
Voice recorder
>
Record
.
2. After the recorder start tone is heard, begin recording speech or sound.
3. When you are finished recording, select
Stop
.
4. Enter the title for the recording, and select
OK
.
Options
After you save a recording to the
Recordings list
, highlight the recording, and
select
Playback
,
Delete
,
Edit title
, and
Alarm
or
Add alarm
.
M i n i b r o w s e r
56